• The drive might be in horizontal or vertical position.
• Use any documentation that comes with the drive and follow those instructions in addition to the
instructions in this topic.
To install or replace a hot-swap drive, do the following:
1. Review the following installation rules:
• When you install drives, follow the order of the drive bay numbers. See "Front view of the server" on
page 19 to locate the drive bays in your server.
• For RAID configuration, the drives must be the same type with the same capacity if they are within a
single RAID array. For more information, see "Configuring RAID" on page 62.
2. Do one of the following:
• If you are installing a new drive, locate the appropriate drive bay. Then, press the circled area
open the handle of the dummy tray.
Figure 122. Opening the handle of a dummy tray
• If you are replacing a drive, locate the drive you want to replace and press the release button
open the handle of the drive.
142
ThinkServer RD650 User Guide and Hardware Maintenance Manual
1
1
1
to
1
1
to
1