6. Touch the static-protective package that contains the PCIe card to any unpainted surface on the outside
of the server. Then, take the PCIe card out of the package.
Note: Carefully handle the PCIe card by its edges.
7. Adjust the card-retaining bracket if necessary. See "Adjusting the card-retaining bracket" on page 91.
8. Position the PCIe card near the PCIe slot. Then, carefully press the PCIe card straight into the slot until it
is securely seated. Ensure that the PCIe card bracket is secured by the riser card bracket.
Figure 65. Installing the PCIe card
9. Pivot the card latch to the closed position to secure the PCIe card in position.
Figure 66. Pivoting the card latch to the closed position
10. Depending on the type of the PCIe card, you might need to connect any required cables. Refer to the
documentation that comes with the PCIe card for specific information.
94
ThinkServer RD650 User Guide and Hardware Maintenance Manual