23. IMAGE STABILIZATION CONTROL
23. IMAGE STABILIZATION CONTROL
23.1 Overview
• The machine provides the following image stabilization control to ensure stabilized copy
image.
Purpose
To stabilize image density
To stabilize gradation
To stabilize toner density
To stabilize image transfer
* An explanation is given of the control for each section.
Toner supply motor
Color skew
correction
PH thermister
Toner supply control
OUT/IN
·
To be set on control panel
D MAX density
Background voltage margin
ATDC toner supply
240
Control
• IDC registration sensor adjust-
ment control
• Max. density adjustment control
• LD intensity adjustment control
• Registration control (color shift
correction)
• Gamma correction control
* TCR control (Y,M,C,K)
* Image transfer output control
2nd image transfer ATVC
PC
PC
drum/
drum/
Y
M
G3/Y
G3/M
TCR sensor
Developing bias Vdc
Image density
Gradation control
Gamma correction data
Gradation correction table
Temperature/
humidity sensor
Theory of Operation Ver. 1.0 Jul. 2009
Control means
IDC registration sensor
Temperature/humidity sensor
PH thermister
TCR sensor
Temperature/humidity sensor
2nd Image transfer roller
PC
PC
drum/
drum/
C
K
G3/C
Grid voltage Vg
IDC registration sensor
Transfer ATVC control
IN
OUT
A0EDT2E266DA