Paper Path; 1-Sided Mode - Konica Minolta BizHub C360 Service Manual

6. OPERATION
6.4

Paper path

6.4.1

1-sided mode

1. Pressing the start key will lift up the feed tray and press the reading roller 1.
2. After the feed tray is lifted up, the take-up motor is started and the pick-up roller and
the feed roller will start rotating to start feeding the first sheet of paper.
3. When the paper reaches the registration roller, a loop is formed in the paper. Then,
the registration motor is started, so that the registration roller transports the paper.
4. The take-up motor is deenergized when a predetermined period of time elapses
after the registration motor has been activated. The reading motor and the exit
motor will start running.
5. It starts reading from the front edge of the original when the before read sensor
turned ON and the specified period of time has passed.
6. Reading roller 1 will be retracted right before the back edge of the original passes
through the reading roller 1. The retracted reading roller 1 will be pressed again to
prepare for the next original.
7. The original will be exit by the reading roller 2 and the exit roller.
8. All motors will turn OFF after the back edge of the original turns OFF the exit sen-
sor and the specified period of time is passed.
18
Theory of Operation Ver. 1.0 Jul. 2009
A0HUT1C002DA