Image Stabilization Control; Overview - Konica Minolta magicolor 2480MF Service Manual

19. Image stabilization control

19. Image stabilization control

19.1 Overview

• To ensure that a stabilized output image is produced at all times, the following image sta-
bilization controls are provided.
Purpose
To ensure stabilized transfer
output
To ensure stabilized image
density; to ensure good tone
reproduction
*An explanation is given of the control for each section.
AIDC Sensor
68
Control
ATVC
* Described in the section dealing with
the Transfer Section
AIDC control
• Leak detection control
• AIDC intensity control
• Reflectance measurement control
• Control of the maximum amount of
toner sticking
• Laser intensity adjustment control
γ
• correction control
1st Transfer Roller
Developing
PC
Charging
Developing Bias
AIDC Control
Temperature/
humidity Sensor
Theory of Operation Ver. 1.0 Nov. 2005
Detection
Temperature/ humidity Sensor
(TEM/HUMS)
IDC Sensor (IDC)
Temperature/ humidity Sensor
(TEM/HUMS)
2nd Transfer Roller
Grid Bias
IN
OUT
ATVC
4139to2098e0