Theory of Operation Ver. 1.0 Jul. 2009
14.3.7
2nd image transfer roller new article detection
• The 2nd image transfer roller (hereinafter referred to as the "transfer roller") is not pro-
vided with any new article detection mechanism. If the transfer roller is replaced with a
new one, therefore, "New Release" must be performed of the "Image Transfer Belt Unit"
in "Counter/ Life" of the Service Mode. Performing "New Release" of the "Image Transfer
Belt Unit" in life counter of the Service Mode will also reset the life counter of the transfer
roller to zero.
14.3.8
2nd image transfer roller life detection
• The life counter of the transfer roller controls detection of life of the 2nd image transfer
roller (hereinafter referred to as the "transfer roller").
• The counter value is recorded in the service EEPROM board of the machine.
Controlled item
Transfer roller rotation time
*1: M represents a code that denotes the transfer roller rotation time.
14. 2ND IMAGE TRANSFER SECTION
Counting unit
*1
M
A0EDT2E309DA
139