Operation; Exit - Konica Minolta BizHub C360 Service Manual

7. EXIT SECTION
7.2

Operation

7.2.1

Exit

• The paper fed out by the center fold roller motor is stacked in the tray by its own weight.
A. Full-of-paper detection
• The capacity of the tray varies depending on the number of sheets of paper in the paper
sets/stacks fed into the tray and detection of a full-of-paper condition cannot be made
based on the number of sheets of paper stacked in the tray.
The main body therefore counts the number of sheets of paper stacked and detects a
full-of-paper condition when a predetermined number of sheets of paper is reached.
If the booklet tray full sensor remains activated for a predetermined period of time, the
main body determines that paper can no longer be fed into the tray and that there is a
full-of-paper condition in the tray.
B. Full-of-paper detection conditions
• The booklet tray full sensor is activated.
• The booklet tray near full sensor is activated when the power switch is turned ON.
• The number of sets/stacks stacked in the tray reaches a predetermined value during
copying.
• A set/stack having a paper length different from that fed out earlier is fed out.
The main body does not determine that there is a full-of-paper condition in the tray under
any condition other than above.
16
Theory of Operation Ver. 1.0 Jul. 2009