Operation; Up/Down Control - Konica Minolta BizHub C360 Service Manual

17. PAPER FEED SECTION

17.3 Operation

17.3.1

Up/down control

• Tray1 and Tray2 are controlled in the same control procedure.
A. Up operation
• paper lift-up plate B is located under paper lift-up plate A.
• The lift-up plate drive shaft of the paper feed tray1(2) lift-up motor is connected to paper
lift-up plate B.
• When the drive shaft of the paper feed tray1(2) lift-up motor rotates, paper lift-up plate B
raises paper lift-up plate A.
Paper feed tray1 lift-up motor (M12)
Paper feed tray2 lift-up motor (M13)
B. Down operation
• When the tray is slid out of the machine, the coupling of the paper feed tray 1(2) lift-up
motor and the lift-up plate drive shaft are disconnected from each other.
• When the driving force of the paper feed tray1(2) lift-up motor is released from the lift-up
plate drive shaft, the paper lift-up plate starts lowering by its own weight.
174
Paper lift-up plate B
Paper lift-up plate A
Theory of Operation Ver. 1.0 Jul. 2009
Paper feed tray1 upper limit sensor (PS25)
Paper feed tray2 upper limit sensor (PS22)
Lift-up plate drive shaft
A00JT2C314AA
A00JT2C315AA