Omron V500-R521B2 User Manual page 59

Section 4
Setting Method
Setting for connecting link unit (V700-L12)
Hatching parts are the changed point from the factory default setting.
Collective setting
Types of code, which is possible to read EAN/UPC, CODE39, NW-7, STF, ITF
Number of reading digits
Detail condition CODE39 detail setting Invalid C/Dof CODE39
Reading
condition
Communication
condition
LED illumination
Buzzer sound
Buzzer sound volume
Buzzer frequency
External trigger signal
READ OK/NG signal output
READ OK/NG signal output system
V500-R521B2/C2
60
User's Manual
Menu sheet
Item
No designated number of digits
Transfer C/D of CODE39
Transfer ST/SP of CODE39
NW-7 detail setting Invalid C/D of NW-7
Transfer C/D of NW-7
Transfer ST/SP of NW-7 (abcd/abcd)
ITF/STF detail setting Invalid C/D of ITF/STF
Transfer C/D of ITF/STF
Reading system Trigger reading
Reading operation Single reading
Reading valid time Trigger + 2 sec.
Number of reading Twice (Verification: once)
coincidence
Communication speed 9600 bps
Data length 8-bit
Parity Even number
Stop bit length 1-bit
Header None
Footer CR
Transfer number of Not transferred
digits
RS/CS control None
CS waiting time Infinity
Communication No protocol system
protocol
Process when reading Transfer ? (CR), > (CR)
is NG
LED illumination time after decoding is 200 ms.
Buzzer sound duration after decoding is 200 ms. W5
Max.
3 kHz, 2 kHz
Negative logic (L active)
Output
Trigger synchronous system, positive logic
(H active)
Command
UC
Setting content
Corresponding
command
J1+R4+B2+B3
+R7+R8
H0
C0
C2
D1
F7
F5
F4
G0
G2
S8
S0
Y2
X1
K6
L1
L3
L5
1Y
1Z+1C
2Z
P0
I0
P5
5H
T5
T0
W2
8B
8Q
8C