Omron V500-R521B2 User Manual page 47

Section 3
Function Explanation
Data transfer contents of each reading code type
UPC-A
UPC-E
EAN
ITF, STF (2 of 5 bar)
NW-7, CODE39
EAN128
Setting method p.63
V500-R521B2/C2
48
User's Manual
Reading code
You can select whether or not to transfer the head character "0" for
transfer digit number adjustment and check digit C/D. ("0" is the
additional character combining with C/D to adjust the number of digit to
be in accordance with EAN-13.)
0 S X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 C/D
S: Number system character (Automatically decided according to the
combination of each character of X1 to X10.)
You can select whether or not to transfer the head character "0" for
transfer digit number adjustment and check digit C/D. ("0" is the
additional character combining with C/D to adjust the number of digit to
be in accordance with EAN-13.)
0 S X1 X2 X3 X4 X5 X6 C/D
S: Number system character (Automatically decided according to the
combination of each character of X1 to X10.)
Reading data (8-digit or 13-digit) is transferred as it is.
Transfers in the order from the next character of the start code to the
character before the stop code. (Start code and stop code are not
transferred.)
You can select whether or not to transfer the start code and stop code.
When the start code and stop code is permitted to transfer, you can
select whether the transferred start/stop code of NW-7 is in lower-case
"a/b/c/d" or in upper-case "A/B/C/D".
Transfer start/stop code of CODE39 is "*".
Add a control character "C1" (ASCII code 5D, 43, 31) which indicates
EAN 128, at the head of the transfer data. Also, FNC1 character, as a
separating character, is replaced to GS (ASCII code 1DH) character
and transferred.
Description