Rating/Performance; General Specification - Omron V500-R521B2 User Manual

Section 1
Product Overview

Rating/Performance

General specification

Applicable bar Types of bar code
code
Number of reading digits
Reading Resolution
performance (*1)
Contrast (PCS)
Reading distance
Reading angle
Skew angle
Pitch angle
Light source
Light output
Scan type
Number of scan
Number of reading coincidence
Reading check
Interface Communication specification
OK/NG output (Only V500-R521B2)
Function set method Menu sheet reading method or host command method
Reading trigger External trigger (Transistor input)
Trigger by command (RS-232C)
Trigger a test reading by pressing the TEST button on the product
Reading result RS-232C output
output
OK/NG signal
(Only V500-R521B2)
Indication LED
Buzzer
Power supply Power voltage
specification
Consumption current
Inrush current
Environment Ambient temperature
Ambient humidity
Vibration resistance
Ambient light resistance
Enclosure rating IP54 (IEC60529 Standard)
Mass 80 g (Excluding cables and connectors)
Input/output V500-R521B2: Cable output
connector
V500-R521C2: DIN 8 pin connector
Code length 2 m
*1 Unless otherwise specified, use a bar code of EAN 1x, MRD 63 % or more (PCS = 0.9 or more).
Specified at a condition of pitch angle α = 0 °, skew angle β = 0 °, tilt angle γ = 0 °, curvature R = ∞
*2 Power voltage is specified at the input/output connecter end of the bar code reader side.
V500-R521B2/C2
20
User's Manual
EAN/UPC (A, E), CODE39, NW-7, ITF
STF (2 of 5 bar), CODE93, CODE128 (including EAN128)
32 digits MAX (Changes according to bar width and reading size)
0.15 mm (at PCS 0.9)
0.45 or more (white reflectance 70 % or more)
60 to 270 mm (At narrow bar: 1.0 mm)
Within 40 ° (Including margins at left and right sides)
±50 ° (However, exclude from 10 ° upper side to 5 ° lower side)
±25 ° (Left and right 25 °)
Red semiconductor laser (Wave length: 650 nm)
1.0 mW or less (Correspond to JIS class 2)
Luster scan
500 scan/sec.
2 to 6 times (Verification: 1 to 5 times)
Buzzer sound, indication LED
RS-232C
NPN open collector output 24 VDC, 30 mA
Reading data output
OK signal is turned on when reading succeeded
NG signal is turned on when reading failed
OK LED illuminates when reading succeeded
NG LED illuminates when reading failed
Notifies a successful reading with a buzzer sound (Muting available)
5 VDC ±10 % (*2)
220 mA typ. (330 mA MAX)
2.5 A MAX
At operation: 0 to + 45 °C; At storage: -10 to + 60 °C
At operation and storage: 30 to 85 % RH (Without due condensation)
12 to 100 Hz 19.6 m/s (2G) X, Y, Z, 3H each
2
3000 lx or less (Fluorescent lamp. Excluding inverter florescent lamp.)