Section 1
Product Overview
Features
A bar code reader is a device to read a bar code attached on a product and transfer the
information to upper equipment.
Various types of information can be managed efficiently by using it combining with PC and
programmable controllers.
Work data are recorded on papers.
> Reading and writing mistakes and
distribution of workers exist.
> Formats are difficult to learn because various
kinds are produced in small numbers.
Cost should be as cheap as possible as
the product price is low.
Ultra-compact design
Optimum for the assembly to each device
Easy installation
Easy to read by pressing the TEST button and know the reading rate with LED
illumination and buzzer sound in real time.
As reading position is easy to check at site before connecting with upper equipment,
installation work and maintenance work hour can be greatly reduced.
p.49
Simple function setting
You can either set the function by reading a menu sheet or by inputting a command on
the upper equipment. You can select the setting method according to the condition.
p.52
V500-R521B2/C2
16
User's Manual
Problems on site
Bar code solution!
Register product numbers and setting on PC
and programmable controllers beforehand and
import a product number only by reading a bar
code. Input mistake or distribution of workers
are eliminated.
Cost is very low by only attaching a printed bar
code label.