Toro Reelmaster 5010- H Service Manual page 277

Pulley Alignment Tool
Toro Part Number: 114- 5446
Use pulley alignment tool to verify alignment of groomer
and/or rear roller brush drive and driven pulleys.
Diameter/Circumference Measuring Tape
Toro Part Number: TOR6023
Spring steel measuring tape for accurately measuring
the circumference and outside diameter of cutting reel
and other spherical components. Tape calibration is in
fixed inch readings (no adjustments).
Turf Evaluator Tool
Toro Model Number: 04399
Many turf discrepancies are subtle and require closer
examination. In these instances, the Turf Evaluator
grass viewing tool is helpful. It can assist turf managers
and service technicians in determining causes for poor
reel mower performance and in comparing the effective
height- of- cut of one mowed surface to another. This
tool should be used with the Toro Guide to Evaluation
Reel Mower Performance and Using the TurfEvaluator
(Toro part no. 97931SL)
Reelmaster 5010- H Page 7 - 7
Figure 12
Figure 13
Figure 14
Cutting Units