System Configuration - Furuno FAR-28 Series Operator's Manual

SYSTEM CONFIGURATION

See page xvi for detailed information about antenna units and radiators.
With FURUNO-supplied monitor
FAR-2137S/2837S/2837SW
POWER SUPPLY UNIT
PSU-007
(For FAR-2137S/2837S)
OR
POWER SUPPLY UNIT
PSU-011*
(For FAR-2827W/2837SW)
* Russian flag only
: Standard
: Option
: Dockyard supply
Category of Units
Antenna unit: Exposed to weather
All other units: Protected from weather
xvi
ANTENNA UNIT
(Performance Monitor PM-51* built in)
Waveguide or
Coax cable
(For FAR-2837SW)
TRANSCEIVER UNIT
RTR-082
For FAR-2837SW
PROCESSOR UNIT
RPU-013
HUB has ports for connection of up to 7 processor units
DC spec
Rectifier
RU-3424
RU-1746B-2
FAR-2117/2127/2817/2827/2827W
ANTENNA UNIT
(Performance Monitor PM-31* built in)
TRANSCEIVER UNIT
RTR-081
For FAR-2827W
*
MONITOR UNIT
MU-190/201CR
(FAR-21x7)
or
MU-231/231CR
(FAR-28x7)
RU-3423
CONTROL UNIT
115/230 VAC
RCU-014
(Keyboard)
or
RCU-015
24 VDC
(Trackball)
or
115/230 VAC
Control Unit
RCU-016
(Remote)
Sub Display
Alarm
VDR
External Monitor
IEC-61162-1 Serial Data
Navigator (INS, GPS, etc.)
(Input/Output)
IEC-61162-1 Serial Data
Speed Log
(Input)
Gyrocompass
AD-100
Track Control Unit
OR
Memory Card
Memory Card
Interface Unit
Interface Unit
CU-200 x 2
CU-200
AC spec
* These monitors have been approved by the IMO,
Transformer Unit
RU-1803
Waveguide
(For FAR-2827W)
24 VDC
100-230 VAC
AIS
Switching Hub
HUB-100
MU-190/201CR for CAT2, MU-231/231CR for CAT1.
If a different monitor is to be used, its effective diameter
must meet the applicable Category requirements:
CAT 1: effective diameter 320 mm or higher
CAT 2: effective diameter 250 mm or higher
For installation and operation of other monitor,
see its manuals.