Furuno FAR-28 Series Operator's Manual page 306

FURUNO
8. PERFORMANCE MONITOR
PM-31 (X-band)
1. Frequency range
2. Input power
nd
3. Power output (2
nd
4. Power output (2
st
5. Step levels (1 pulse to 2
PM-51 (S-band)
1. Frequency range
2. Input power
nd
3. Power output (2
nd
4. Power output (2
st
5. Step levels (1 pulse to 2
9. SWITCHING HUB HUB-100
1. Access Format
2. Switching Format
3. Transmission Speed
4. Necessary Cabling
5. Max. Cable Length
6. Ports
7. Buffer Memory
8. MAC Address Table
9. Environmental Conditions
Ambient Temperature -15 to +50°C
Relative Humidity
EMC
Waterproofing
10. Power and Power Consumption
Power
Power Consumption
11. Coating and Color
9370 to 9450 MHz
Min.: +8 dBm, Max.: +28 dBm
pulse max output)
pulse min output)
nd
pulse)
3020 to 3080 MHz
Min.: -5 dBm, Max.: +15 dBm
pulse max output)
pulse min output)
nd
pulse)
CSMA/CD
Store and Forward
Half-duplex: 10 Mbps/100 Mbps
Full-duplex: 20 Mbps/200 Mbps
10BASE-T: Category 3 or higher STP cable
100 BASE-TX: Category 5 or higher STP cable
100 m
8 ports
- All ports auto-MDIX compliant (straight or cross cable,
automatic recognition)
- All ports EMC compliant (STP cable port)
- All ports equipped with 3 LED injectors
(Link/Act, Full-duplex/Collision, 100 Mbps/10 Mbps)
SRAM buffer
1024
95% (at 40°C)
IEC 60945
IPX0
100-230 VAC
100mA/100 VAC
N3.0
-36 dBm
-56 dBm
7.5 to 10.5 dB
-15 dBm
-35 dBm
9.0 to 11.0 dB
SP - 4
FAR-21x7(-BB)/28x7 SERIES
E3519S01L-P