Ship's Position - Furuno FAR-28 Series Operator's Manual

1. RADAR OPERATION
Item
[OPERATION] (con't from previous page)
OWN TRK ALL ERASE
TGT TRK ALL ERASE
MARK ALL ERASE
DROP MARK
[PICTURE]
PICTURE1 – PICTURE4
NEAR
FAR
NEAR BUOY
FAR BUOY
ROUGH SEA
SHIP
HARBOR
COAST
1.37

Ship's Position

Select the source of ship's position data as follows:
1. Right-click the OSN POSN box at the top right corner of the screen to show
the OS POSN menu.
2. Select 1 NAV AID.
3. Select GPS1, GPS2 or DEAD RECKONING as appropriate.
GPS1: GPS navigator connected to nav port
GPS2: GPS navigator connected to SPEED LOG port or TRACK CONTROL
1-72
Erases all own ship's tracks.
Erases all other ship's tracks.
Erases all marks.
Inscribe a drop mark.
Actuates settings of user-programmed setup.
Optimum setting for short range detection using a range scale of 3
nm or less on calm seas
Optimum setting for long range detection using a range scale of 6
nm or larger
Optimum setting for detecting navigation buoys, small vessels and
other small surface objects at close range
Optimum setting for detecting navigation buoys, small vessels and
other small surface objects at long range
Optimum setting for rough weather or heavy rain
Optimum setting for detecting vessels
Optimum setting for harbor navigation
Optimum setting for coastal navigation
[OS POSN MENU]
1 NAV AID
GPS1/GPS2/
DEAD RECKONING/
LAN
2 MANUAL L/L
00°00.00 N
000°00.00 W
3 SIO DATA LAN OUTPUT
OFF/ON
OS POSN menu
port.
Description