Showing, Hiding The Ais Display - Furuno FAR-28 Series Operator's Manual

4. AIS OPERATION
4.2

Showing, Hiding the AIS Display

Left-click the AIS DISP box at the right side of the screen to show or hide the AIS
display and set display criteria.
DISP ALL: All AIS targets received from the AIS transponder are displayed with
symbols.
DISP FILT: AIS targets are displayed according to the criteria set with AIS DISP
FILTER on the AIS/TT menu. See section 4.3 for details.
DISP OFF: All AIS symbols disappear, but tracking continues internally.
When the AIS is turned on, AIS targets are marked with appropriate AIS symbol
as below.
SYMBOL
A
Note 1: The equipment continues to process AIS targets when the AIS feature is
switched off. When the AIS is again turned on, symbols are immediately
displayed.
Note 2: You can turn the AIS display off by putting the cursor in the AIS box and
long-pushing the left button to show FUNC OFF. Data processing is
terminated.
Note 3: AIS symbols are momentarily erased and the screen is redrawn after the
heading is changed in the head-up mode.
Note 4: When no AIS data is received, the message "RECEIVE" appears in the
Alert Box. Check the AIS transponder.
4-2
AIS
DISP
OFF
AIS DISP box
STATUS
Activated All AIS symbols shown with thick line.
target Color is selectable from menu.
ROT higher Displayed for turning ship.
than preset
ROT
Dangerous Displayed when CPA/TCPA is within
target CPA/TCPA LIMIT. Red in color. Flashing
until acknowledged. .
Lost target "X" overlaid on a lost target. Red in
color. Erased after acknowledged.
Target selected Broken square is overlaid on target
for data display selected to display its data. A, B or C
shown to indicate data box location (at
the right side of the screen).
AIS symbols
REMARKS