Hiding, Showing Graphics On The Video Plotter Display - Furuno FAR-28 Series Operator's Manual

5. VIDEO PLOTTER OPERATION
5.8 Hiding, Showing Graphics on the Video Plotter
Display
1. Left-click the MENU box to open the menu.
2. Select 5 [PLOTTER] to open the PLOTTER menu.
3. Select 9 [DISPLAY]. Select an item. To go to page 2, select 0 NEXT. You may
return to page 1 by choosing 1 BACK and pressing the scrollwheel or the left
button.
1 BACK
2 GRID
OFF/ L/L
3 OWN TRACK
OFF/ON
4 TARGET TRACK*
OFF/ON
5 MARK
OFF/ON
6 LAND DENSITY*
OFF/ON
7 PLACE NAME*
OFF/ON
8 COAST LINE
OFF/ON
9 CONTOUR LINE
OFF/ON/DEPTH
0 NEXT
4. Push the scrollwheel to select OFF or ON.
Note: LAND DENSITY fills (ON) or hollows (OFF) land on an electronic
5. Repeat steps 3 and 4 to set other items.
6. Push the right button three or four times to close the menu depending on
which page of the DISPLAY menu you are using.
5-12
[DISPLAY (1/2)]
Page 1
chart. Land will be hollow when wrong card or wrong scale is used,
regardless of LAND DENSITY setting.
1 BACK
2 NAV LINE(MAP)
Choose
0 NEXT
3 DANGER HIGHLIGHT
to show
page 2.
4 PROHIBITED AREA
5 BUOY
* Not available on IMO or A type
DISPLAY menus
[DISPLAY (2/2)]
OFF/ON
OFF/ON
OFF/ON
OFF/ON
Page 2