Editing A Nav Line - Furuno FAR-28 Series Operator's Manual

5.11.2

Editing a nav line

Follow the procedure below to edit a nav line. Before editing a nav line it must be
disabled. See section 5.11.6.
1. Left-click the MENU box to open the menu.
2. Select 8 [NAV LINE•WPT].
3. Select 8 [NAV LINE SET].
4. Select 2 NAV LINE NO. SELECT.
5. Use the scrollwheel to enter nav line number to edit.
6. To edit nav line name, Select 3 NAV LINE NAME. Use the scrollwheel to
change name.
7. To replace waypoints in a nav line, do the following:
1) Select 4 [NAV DATA ENTRY].
2) Push the scrollwheel to select the waypoint you wish to replace.
3) Roll the scrollwheel to set new waypoint number. To delete the waypoint from
the nav line, enter "000".
4) Push the scrollwheel to finish.
8. Push the right button several times to close the menu.
5. VIDEO PLOTTER OPERATION
5-25