5056-XXX
Map 11 - Paper size map
Step
Questions/actions
1
Do the paper size sensor actuators on the paper
operation tray operate correctly as you slide the paper
location plate?
2
Do the size sensor levers operate correctly?
3
Are the following connectors properly connected?
CN4 on the expansion feeder control card (trays 2—5).
4
If the problem is in tray 1, replace the CK2 daughter
board.
If the problem is in an expansion tray, replace the size
sensor card associated with the affected tray.
Does this fix the problem?
2-48
Service Manual
Yes
No
Go to step 2.
Replace parts as
necessary.
Go to step 3.
Replace the size
sensor levers.
Go to step 4.
Properly connect
the connectors.
Problem solved.
Replace the
printer controller
board (tray 1).
Replace the
expansion feeder
control card
(trays 2—5).