Clearing Finisher Messages - Lexmark C920 Service Manual

5056-XXX
Message
86 Abnormal coating roll
88 <color> Toner is low
88 Replace <color> toner
88 OCR exhausted
200.yy Paper jam
24x.yy Paper jam
250.yy Paper jam
249.yy Paper jam

Clearing finisher messages

Message
Bin <x> Full
Check Finisher Installation
Close Finisher Top Cover
Empty Box
Leave Staple Job in Finisher
Staples Empty
2-42
Service Manual
Meaning
The coating roller is damaged, or
performing abnormally.
Self explanatory.
Self explanatory.
The OCR has reached the end of
life and needs to be replaced.
Solution
Remove the stack of paper from the bin to clear the message. If you
assigned the bin a name, the bin name is displayed instead of the bin
number. Press
to clear the message and continue printing.
Make sure the finisher is flush against the printer. If this does not resolve
the problem, go to "Finisher service check" on page 2-77
finisher set switch.
Close the finisher top cover, and align the finisher flush against the
printer to clear the message.
Empty the hole punch box to continue printing.
The printer has detected a paper jam while printing a job that must be
stapled. The message Leave Staple Job in Finisher alternates
with the Paper Jam message. Leave the printed pages on the stacking
tray inside the finisher, and clear the paper jam in the printer. Press
to clear the message and continue printing.
Replace the staple cartridge if you want to continue stapling. You can
press Go to clear the message and continue printing without stapling.
Action
Replace the coating roll.
Replace the specified toner
cartridge.
Select Continue to clear the
message and continue printing.
Replace the specified toner
cartridge.
Select Continue to clear the
message and continue printing.
Replace the oil coating roll.
Select Continue to clear the
message and continue printing.
1. Clear the paper path.
2. After clearing the paper path,
select Continue to resume
printing.
1. Clear the paper path.
2. After clearing the paper path,
select Continue to resume
printing.
1. Clear the paper path.
2. After clearing the paper path,
select Continue to resume
printing.
1. Clear the paper path.
2. After clearing the paper path,
select Continue to resume
printing.
to check the