5056-XXX
912 - High-Capacity Feed Motor Error
Step
Questions/actions
1
Is connector CN22 on the printer controller board
securely connected?
917 - RIP Fan Error
917 Service
Fan Error
Step
Questions/actions
1
Is connector J5 on the RIP board connected properly?
2
Is 24 V dc present between pins 1 and 3 of connector
J5 on the RIP board?
3
Is 24 V dc present between pin 80 of the RIP/printer
controller and ground?
918 - Main Unit Fan Error
Step
Questions/actions
1
Are CN14 on the printer controller board and CN03 on
the printhead controller board properly connected?
2
Is +24V present between pins and 1 and 3 on
connectors CN12 (upper left fan) and CN11 (upper
right fan) on the printer controller board?
919 - Power Supply Fan Error
Step
Questions/actions
1
Is CN17 on the printer controller board properly
connected?
2
Is CN6 on the CK2 daughter board properly
connected?
3
Is +24 V present between pins 1 and 3 of connector
CN6 on the CK2 daughter board?
4
Did either exchange solve the problem?
2-10
Service Manual
Yes
No
Go to
"High-
Plug the
capacity feeder
connector in
(HCF) service
securely.
check" on
page
2-53.
Yes
No
Go to step 2.
Properly connect
J5.
Replace the RIP
Go to step 3.
fan.
Replace the RIP
Replace the
board.
printer controller
board.
Yes
No
Go to step 2.
Connect CN14
and CN03.
Replace the
Replace the
failing fan.
printer controller
board.
Yes
No
Go to step 2.
Connect CN17.
Go to step 3.
Connect CN6.
Replace the
Replace the
power supply fan.
printer controller
board.
Problem solved.
Replace the CK2
daughter board.