Operating Clearances; Environment; Printer Temperature And Humidity - Lexmark C920 Service Manual

5056-XXX

Operating clearances

The following clearances are recommended to ensure proper operation.
Minimum clearance requirements
Printer
Duplex
High Capacity Feeder
Finisher
Banner Media tray
Note: Required clearance is 13 in. (330 mm) without HCF, and 30 in. (762 mm) with HCF.

Environment

Printer temperature and humidity

Environment
Operating
Air temperature - product operating
Air relative humidity
Altitude
Ambient operating environment
Storage
Storage temperature — printer and supplies
Relative humidity
Shipping
Shipping temperature — printer and supplies
Relative humidity
In some cases, performance specifications (such as paper OCF, EP cartridge usage) are specified to be measured at an
ambient condition
1-18
Service Manual
Top Left side
9 in. 13 in.
229 mm 330 mm
9 in. 13 in.
229 mm 330 mm
9 in. 13 in.
229 mm. 330 mm.
9 in. 13 in.
229 mm. 330 mm.
9 in. 13 in.
229 mm 330 mm
Specifications
10 - 33 C (50 - 91 F)
Relative humidity 20 to 80%
0 — 2300 meters (7,545 ft)
3 to 27C(37-80F) and 35% to 70% RH
0 to 35C (32 to 90F)
20 to 80%
-5 to 40C (23 to 104F) at 10 to 90% RH
10 to 90%
Right side Rear
6 in. 5 in.
153 mm 127 mm
13 in. 5 in.
330 mm 127 mm
30 in. 5 in.
762 mm 127 mm
6 in. 5 in.
153 mm 127 mm
46 in. 5 in.
1168 mm 127 mm
Front
27 in.
686 mm
27 in.
686 mm
27 in.
686 mm
27 in.
686 mm
27 in.
686 mm