Lexmark C920 Service Manual page 78

5056-XXX
Message
Replace Black Photo Dev
Replace Fuser
Replace Transfer Belt
Replace <Color>
Resetting Active Bin
Resetting Fuser Count
Resetting the Printer
Restore Held Jobs
Restoring Factory Defaults
Restoring held job(s) x/y
2-36
Service Manual
Meaning
The black photodeveloper is
nearing the end of life and needs
replacing.
The fuser is nearing the end of life
and needs replacing.
The transfer belt is nearing the
end of life and needs replacing.
Self explanatory.
Self explanatory.
Self explanatory.
Self explanatory.
Restore held jobs on the hard
disk?
The printer settings are being
reset to the factory default state.
The printer has been reset or
turned on, and the printer detects
print and hold jobs on the hard
disk.
Action
-Select Continue to clear the
message and print without replacing
the black photodeveloper.
-Replace the black photodeveloper.
-Select Continue to clear the
message and print without installing
a new fuser.
-Replace the fuser and, if necessary,
reset the printer internal counter for
the fuser.
-Select Continue to clear the
message and print without installing
a new transfer belt.
-Replace the transfer belt and, if
necessary, reset the printer internal
counter for the transfer belt.
Replace the specified toner
cartridge.
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
-Select Continue to restore all Print
and Hold jobs on the hard disk.
-Select Do not restore to delete
Print and Hold jobs.
Wait for the message to clear.
Note: When factory default settings
are restored:
-All downloaded resources (fonts,
macros, symbol sets) in the printer
memory are deleted.
-All menu settings return to the
factory default setting except:
-The Display Language setting in
the Setup Menu.
-All settings in the Parallel Menu,
Serial Menu, Network Menu,
Infrared Menu, LocalTalk Menu,
USB Menu, and Fax Menu.
-Wait for the message to clear.
-Select Quit restoring to delete
unrestored Print and Hold jobs.
Note: x represents the number of
the job being restored, and y
represents the total number of jobs
to be restored.