Invacare® Spectra XTR Series
1.
Remove the rear cover held by the velcro strips.
2.
Release the bolts (2) in the torque support (1) using the Allen
key. Maintain counter pressure on the nuts (3) with the Allen
key.
3.
Set the width of the armrest. The possible positions of the
armrests are set using the bores in the torque support.
4.
Retighten the bolts.
5.
Repeat the process on the other armrest.
5.5.6 Set the resistance of the flip-up armrest
The movement of the flip-up armrests can be set to have greater
or less resistance.
Requirements:
•
Allen key 5 mm
34
1.
To make the armrest easier to move, release the bolt of the
adjusting wrench (1) with the Allen key.
2.
To make the armrest more difficult to move, tighten the bolt of
the adjusting wrench (1) with the Allen key.
5.5.7 Adjusting the position of the arm pad of the
flip-up armrest
Requirements:
•
Allen key 5 mm
1528224-Q