Adjustment Options For The Modulite Seat Unit; Adjusting The Height Of The Armrests; Adjusting The Width Of The Armrests; Adjusting The Position Of The Armrest In Depth - Invacare Spectra XTR User Manual

Power wheelchair
Hide thumbs Also See for Spectra XTR:
Table of Contents

Advertisement

Invacare® Spectra XTR Series
5.6 Adjustment options for the Modulite seat
unit

5.6.1 Adjusting the height of the armrests

Loosen the wing screw A.
1.
2.
Set the armrest to the desired height.
3.
Re-tighten the wing screw.

5.6.2 Adjusting the width of the armrests

WARNING!
Serious injury hazard if one of the armrests
falls out of its bracket because they have been
adjusted to a width which exceeds the permissible
value
– The width adjustment is fitted with small stickers with
markings and the word "STOP". The armrests must
never be pulled out further than the point at which
the word "STOP" is completely legible.
– Always tighten the fixing screws properly once
adjustments have been completed.
36
Depending on the side, the screw is accessible from the
front or the rear.
Requirements:
Allen key 8 mm
1.
Loosen screw A.
2.
Adjust armrest to required position.
3.
Retighten the screw.
4.
Repeat this procedure for the second armrest.

5.6.3 Adjusting the position of the armrest in depth

Prerequisites:
1 x 6 mm Allen key
1528224-Q

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spectra xtr² hd

Table of Contents