Initializing The Network Setting - Epson TM-T83II Technical Reference Manual

Initializing the Network Setting

When network connection fails, follow the steps below to initialize the network setting to the
default.
The EPSON TMNet WebConfig password is also initialized.
Other settings such as device ID, style sheet, and Server Direct Print settings are not
initialized.
1
Load the paper on the product and turn on the product.
2
Push and hold the push button for 10 seconds or longer.
The following initialization start message is printed.
Press the push button with a thin object such as a tweezers.
Do not turn off the power until the initialization is completed.
3
20 to 25 seconds later, the following message is printed, and a status sheet is
printed out.
Chapter 2
Push button
Setup
2
55