Table of Contents
Advertisement
Connecting the Serial Communication Device
Use a serial cable to connect a device to the serial port of this product.
To communicate with a serial communication device, communication conditions of the device
should match those of this product.
Refer to the manual for the serial communication device to check the following conditions.
• Communication Speed
• Data bit
• Parity
• Stop bit
• Flow control
The communication conditions of this product are configured using EPSON TMNet WebConfig.
For detail, refer to
"Setting for Connected Devices" on page
Key Input Device via a USB Interface
For key input devices such as barcode scanners and keyboards, connect a USB cable of a device to
the USB port at the rear of this product.
Use EPSON TMNet WebConfig to select a device control script and perform communication tests.
For detail, refer to
"Setting for Connected Devices" on page
57.
57.
Chapter 2
Setup
2
39
Hide quick links:
Advertisement
Table of Contents
