Appendix; Product Specifications - Epson TM-T83II Technical Reference Manual

Appendix

Product Specifications

Printing method
Cutting method
Interfaces
Buffers
Barcode/two-dimensional symbol/
printing
Power supply
118
Thermal line printing
Partial cut (cutting with one point in left edge left uncut)
• Standards: USB2.0 (High/Full/Low speed)
USB host port
• No. of ports: 2 ports
• Connector: Type A
• Standards: USB2.0 (High/Full/Low speed)
USB device port
• No. of ports: 1 port
• Connector: Type B
• Flow control: XON/XOFF control or DTR/DSR control
Serial
• Baud late: Maximum 115200 bps (bps: bits per second)
• Parity: Odd, Even, None
• Connector: D-sub 9 pin (Male)
• No. of slots: 1 slot
microSD card
• Connector:
Ethernet 10Base-T/100Base-TX
• Pin: 6 pin
Drawer kick
• Connector: Modular
Receive buffer 4 KB/45 bytes
Downloaded buffer 12 KB (downloaded images)
NV graphics data 256 KB
JAN 8 (EAN 8), JAN 13 (EAN 13),UPC-A, UPC-E,CODE 39,ITF,
CODABAR (NW-7),CODE 93,CODE 128,PDF417, QR CODE,
MaxiCode, GS1-128, GS1 DataBar Omnidirectional,
GS1 DataBar Truncated, GS1 DataBar Stacked,
GS1 DataBar Stacked Omnidirectional, GS1 DataBar Limited,
GS1 DataBar Expanded, GS1 DataBar Expanded Stacked,
Composite Symbology
AC adapter (Model: PS-180)
Make sure that the product power is turned off before
inserting or removing a microSD card.
Use a microSD card with wear leveling.
(only for cash drawer or external optional buzzer)