Web Service Settings - Device Admin - Customer Display - Epson TM-T83II Technical Reference Manual

Web Service Settings - Device Admin - Customer Display

You can use this to set communication with the customer display and check its operation.
Item
Customer Display
Communica- Communications
tions settings speed (bps)
Data bit
Parity
Brightness settings
Test display
Apply
Chapter 3
Set whether to use the Customer Display.
Set the communication speed.
Usually, not required set.
Set the data bit length. Usually, not required set.
Set the parity. Usually, not required set.
Set the brightness of the customer display.
You can set 20%, 40%, 60%, or 100%. The maximum bright-ness is
100%.
Performs a test display to the customer display.
Saves settings to TM-T83II-i.
Application Development Information
Description
3
81