Connecting The Product To The Network; For Wired Lan Connection - Epson TM-T83II Technical Reference Manual

Connecting the Product to the Network

For Wired LAN connection

Connect the product to a network by a LAN cable via a hub.
Insert a 10BASE-T/100BASE-TX LAN cable into the LAN connector until it clicks.
• When LAN cables are installed outdoors, make sure devices without proper surge
CAUTION
• Never attempt to connect the customer display cable, drawer kick cable, or a standard
protection are cushioned by being connected through devices that do have surge
protection.
Otherwise, the devices can be damaged by lightning.
telephone line cable to the LAN connector.
Chapter 2 Setup
2
35