Connecting A Serial Communication Device - Epson TM-T88VI-iHUB Reference Manual

Keyboard
Setting Item
VID & PID
Interface Number
Device ID
Device Type
Control Script
Card reader
Setting Item
VID & PID
Interface Number
Device ID
Device Type
Control Script

Connecting a Serial Communication Device

You can connect a device that supports serial communication using the serial port. Up to five devices can be
registered.
To register, change, or delete the device, use the TM-T88VI Utility for Windows or EpsonNet Config (Web ver-
sion).
How to check if a USB-Serial conversion cable can be used
Connect the USB-Serial conversion cable to the printer, then print a status sheet. If the information shown
below is found in the status sheet, the conversion cable can be used.
ePOS-Device Peripheral
Device1
Vendor
Product
Interface Number
DeviceID
Type
You can acquire the same information by accessing the menus of TM-T88VI Utility for Windows as described
below.
[TM-Intelligent] - [Device Administration] - [Serial Communication Device]
:xxxxxx
:xxxxxxxx
:0
:usb_serial
:SimpleSerial
Setting
0x046a & 0x0037
0
local_keyboard
Keyboard
Keyboard_Generic.js
Setting
0x046a & 0x0037
1
local_scanner
Barcode reader
Scanner_Generic.js
Chapter 2 Setup
2
45