Key Input Device
Connect the key input device to a USB connector. For how to set barcode scanners and so on, see the respective
product manuals.
PC-POS System
Since it is recognized as a HID device, setting is not required.
Systems that use TM-DT software
Set the device ID, control script and so on with EPSON TMNet WebConfig. For details, see
service settings - Key input device" on page
Fix the USB cables with wire saddles to prevent detachment.
Serial Communication Device
Connect the serial communication device to a COM connector. For how to set the device, install the driver and
so on, see the respective product manuals.
PC-POS System
Align communication conditions between this product and the device.
Systems that use TM-DT software
Align communication conditions between EPSON TMNet WebConfig and the device.
Set the device ID, communication conditions, control script and so on with EPSON TMNet WebConfig. For
details, see
"Settings - Web Service settings - Serial communication Device" on page
Powered USB Hub Unit
Attach the powered USB hub unit to the base of this product, and connect the cables to this product's DC con-
nector and USB connector.
For details on the powered USB hub unit, see "OT-PH10 Installation Guide".
104.
Chapter 2 Printer Functions and Settings
"Settings - Web
105.
2
44