Audio Setup - Samsung SNP-3120 User Manual

setup screen

Audio setup

You can configure the I/O settings of the audio source from the camera.
1. From the Setup menu, select the
<Video & Audio (
2. Click <Audio setup>.
3. Set the audio input value.
• Codec : Specify the audio codec.
- G.711 : A audio codec standard,
it uses 64 Kbps PCM (Pulse Code
Modulation) encoding.
ITU standard audio codec that is
adequate for digital voice transfer in PSTN network or through a PBX.
- G.726 : ITU standard audio codec applying ADPCM (Adaptive Differential Pulse
Code Modulation) for variable bit rates of 40/32/24/16 Kbps to 64 Kbps PCM
encoding.
• Bitrate : Set the bit rate to differentiate compression ratio if using G.726 codec.
• Gain : Specify the audio input amplification.
4. Set the audio output level.
• Enable : Sets whether to use audio output.
• Gain : Set the amplification value for the audio output.
5. When done, click [Apply (
98_ setup screen
)> tab.
)].