Samsung SNP-3120 User Manual page 148

appendix
PROBLEM
<Video analytics> of <Event
setup> is set to <Enable>, but
no notification e-mail reaches me
even when an analysis event had
occurred.
Can I define event rules even
when I don't use <Video
analytics>?
No signal is found at the Alarm
Output port even when an
intelligent video analysis event is
generated.
Cannot record into the SD memory
card.
SD memory card is inserted but
the camera does not operate
properly.
Cannot format the SD memory
card.
148_ appendix
Verify the settings in the following sequence:
A. Check <Data & Time> settings.
B. The <Video analytics> should be set to <Enable>.
C. Check if the <E-mail> option of <Event action setup> menu is
checked to use.
Yes, it can be. You can set rules for events despite of the intelligent
video analysis setting.
Check alarm output port settings.
Check if the memory card is defective.
Check if the write protection tab of the memory card is set to "LOCK".
Check if the memory card is inserted in the proper direction. Operation
of memory card that is formatted by other devices is not guaranteed with
this camera unit
Format the memory card again in <Setup>  <Event>  <Record>
menu.
Check if the write protection tab of the memory card is set to "LOCK".
SOLUTION