Initialize - Samsung SNP-3120 User Manual

INITIALIZE

Initialize
Main Menu
• Auto Refresh : Enables optimizing the
status of the camera's built-in electric
circuits and components on a regular
basis.
(A regular operation can be scheduled.)
This mode can be used to maintain and
repair the current settings of the camera
when anomalous operations occur: e.g.
The camera happened to directly face a
light source, or the settings have been
canceled after the camera repeatedly
rotated in all four directions for a long time
to monitor a specific location.
The default setting is Off.
- OFF, 1~7 Days : Selecting Off disables
Auto Refresh and selecting 1~7 Days
automatically executes it after 1~7 days
has passed.

M
Auto Refresh takes approximately 10 seconds
to finish. If Auto Refresh activates in the
middle of a sequence action, the camera pauses the sequence action and performs an Auto
Refresh, then resumes the sequence action once the refresh is complete.
Initialize
Main Menu Main Menu
Camera Setting Camera Setting
P/T Setting P/T Setting
OSD Setting OSD Setting
Initialize Initialize
Initialize Initialize
Auto Refresh Auto Refresh OFF OFF
English _91