At A Glance (Snp-3120) - Samsung SNP-3120 User Manual

AT A GLANCE (SNP-3120)

Item
Main unit
Dome Cover
Audio
Alarm In / Out
terminals
Video, RS-485, Power Used to connect monitor, RS-485 device or power.
ID setup switch
Screw Hole
Reset Button
Network port
Main unit includes the lens, switch board, PCB boards and screws.
Dome cover for the lens and unit protection.
Audio I/O port.
Used to connect alarm in/out terminal block.
Used to setup the camera ID or communication protocol.
Used to fix the camera to the ceiling.
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
J
If you reset the camera, the network settings will be adjusted so that
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
Used to connect a PoE+ or LAN cable.
Description
English _13