Samsung SNP-3120 User Manual page 94

setup screen
• ATC sensitivity : Affect the transfer rate according to the variance in the network
bandwidth.
The transfer rate will be adjusted to the fastest if the bandwidth is <Very high>,
and adjusted to the latest if the bandwidth is <Very low>.
• ATC limit : If the quality or frame rate is adjusted, the property will be changed to
the applied value (%) against the previous setting value (100%).
Note that if you reduce the property value too much, you may encounter flickering
on the screen. So it is advisable to adjust the value within the threshold.

J
It is recommended to apply ATC control only for cameras supporting ATC.

Set the ATC sensitivity to <Very low> in a network environment with high variance in the network
bandwidth.

If the network connection is unstable, you may encounter flickering on the screen.
7. When done, click [Apply (

M
MJPEG, H264 is the default profile and you cannot delete it or change the name and codec.

MPEG4 videos can not be stored in the SD memory.
94_ setup screen
)].