Dip Switch Setting; How To Set Up Protocols And Id Dip Switches - Samsung SNP-3120 User Manual

installation & connection

DIP SWITCH SETTING

How to set up Protocols and ID DIP Switches

You can control various settings of the camera system using the Communication and ID
DIP switches. Before installing the product, please set up the DIP switches according to the
installation environment.
1. Detach the camera frame from the install base, and place the bottom of the frame
toward you as shown in the picture below.
2. Set the switches according to your installation environment. For more detailed setup
information, please refer to the chart on the next page.
3. The camera may malfunction if the switches are not fully turned On/Off; please
double check the switches before finishing setup.
20_ installation & connection
Camera ID DIP Switch(SW1) Communication Protocol
DIP Switch(SW2)