Samsung SNP-3120 User Manual page 108

setup screen
To configure the swing settings
Swing is a monitoring function that moves between two preset points and enables you to
trace the motion.
1. Select <Swing setup> in <Sequence
setup>.
The menu screen will switch to the
swing setting screen.
2. Select a swing setting mode.
• Pan swing : You can set the swing
monitoring using the PAN function.
• Tilt swing : You can set the swing monitoring using the Tilt function.
• Pan & Tilt swing : You can set the swing monitoring only using both PAN and Tilt
functions.
3. Set <First preset> and <Second preset> to specify a swing range.

J
When moving to the second preset from the first preset, the camera will move to the right
direction on the screen.
4. Set the moving speed and dwell time.
5. Press the [
The first preset, second preset, speed and dwell time will be saved in set mode.
6. Press the [
It performs the swing operation.
7. Press the [
The running swing will be stop.

J
If you want to set the swing, then you need at least two presets set already.
108_ setup screen
] button.
] button.
] button.