Samsung SNP-3120 User Manual page 15

Item
Reset Button
Alarm In / Out
terminals
Network port
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
J
If you reset the camera, the network settings will be adjusted so that
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
Used to connect alarm in/out terminal block.
Used to connect a PoE+ or LAN cable.
Description
English _15