Samsung SNP-3120 User Manual page 40

installation & connection
3. Secure the safety wire (attached to the product) to the housing as shown.

For details about the cable connection, refer to the "Camera Wiring Interface Board" section in this
manual.
4. Arrange the cables inside the housing lest they be damaged or stuck in, and use the
L-shaped wrench to tighten 4 screws to the housing. To ensure waterproofness, this
step needs your special care. Otherwise, the gasket on the outer side of the product
may be loose or just stuck in.
40_ installation & connection
Safety-wire
Housing
Main-frame
Gasket
Safety-wire
Screw