Interrupt Clear Timer; Error Job Skip - Kyocera TASKalfa 5500i Operation Manual

Hide thumbs Also See for TASKalfa 5500i:
Table of Contents

Advertisement

Interrupt Clear Timer

Set the period after which the machine reverts to Normal mode when it has been set to Interrupt Copy mode
and then left unused. Any period between 5 and 495 seconds (in five-second increments) can be set.
The procedure for setting the interrupt clear timer is explained below.
1
Press the System Menu key.
2
Press [
], [Date/Timer], [
3
Press [+] or [-] to enter the time for the interrupt clear timer.
4
Press [OK].

Error Job Skip

Set whether a job for which a "Add paper in cassette #" or "Add paper in Multi Purpose tray" error occurred when
the job was started is automatically skipped after a set period of time elapses. The period of time can be set
within the range 5 to 90 seconds (increments of 5 seconds).
NOTE:
When a job is skipped, it is moved to the end of the job queue.
The procedure for setting the Error Job Skip is explained below.
1
Press the System Menu key.
2
Press [
], [Date/Timer], [
3
Press [Off] or [On].
4
If you selected [On], set the time until the job is skipped with [+] or [-].
5
Press [OK].
] and then [Change] of Interrupt Clear Timer.
] and then [Change] of Error Job Skip.
9-79
Default Setting (System Menu)
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Taskalfa 3500iTaskalfa 4500i

Table of Contents