Appletalk Setup - Kyocera TASKalfa 5500i Operation Manual

Auto-IP Settings
Select whether or not to use Auto-IP. The default setting is On.
Use the procedure below.

AppleTalk Setup

Select the Apple Talk network connection. The default setting is On.
Refer to AppleTalk on page 9-99 about the procedures.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Next]
of TCP/IP Setting.
3
Press [Change] of TCP/IP.
4
Press [On] and then press [OK].
5
Press [Change] of IPv4.
6
Press [Auto-IP].
7
Press [On] or [Off] of Auto-IP and then press [OK].
8
After changing the setting, restart the network from
the system menu, or turn the machine OFF and
then ON.
For detailed information on restarting the network,
refer to Restart Network on page 9-106.
2-15
Preparation before Use
2