Calibration Cycle - Kyocera TASKalfa 5500i Operation Manual

Calibration Cycle

After Auto Clear has been activated, or during printing, Calibration... Remaining: 50 seconds may be displayed.
While this message is displayed, the machine makes adjustments to maintain image quality. Wait until the
message disappears.
Set the calibration cycle here. The setting items are as follows.
Item
Auto
Short
Standard
Long
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [
3
Select [Auto], [Short], [Standard] or [Long].
4
Press [OK].
Calibration
Calibrate the device to ensure consistency with the original grayscale. If you find that the grayscale is not
improved by this calibration, use tone curve adjustment (see page 9-71).
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [
3
Press [Execute]. Calibration begins.
4
Press [OK] after Calibration is complete.
Automatically sets the cycle for calibration.
Sets a short calibration cycle and increases the number of times
performed, with priority to image quality.
Sets a standard calibration cycle, compromising between image
quality and downtime for processing.
Sets a long calibration cycle and decreases the number of times
performed, to ensure minimal downtime.
] and then [Change] of Calibration Cycle.
] and then [Next] of Calibration.
9-74
Default Setting (System Menu)
Description