Selecting How To Copy Originals - Kyocera TASKalfa 5500i Operation Manual

Selecting How to Copy Originals

Select whether you wish to create individual copies on different size paper matching the original sizes or to
produce all copies on the same size paper.
NOTE:
This function is available regardless of whether originals have the same width or not.
The table below shows the finished document sizes for the different original size options.
Mixed Size Copies
Same Size Copies
Use the procedure below to copy mixed size originals.
Mixed Size Originals
Off
Mixed Size
Copies
Same Size
Copies
Original : A4
Zoom : 100%
Paper : A4
Preview
Add Shortcut
Status
Option
Originals are detected individually for size and
copied to the same size paper as originals.
Originals are all copied to the same size paper.
Copies
Original Width
Same Width Different
Width
Top Page Direction
Long Edge Short Edge
Left Left
Cancel OK
10/10/2010 10:10
Description
1
Press the Copy key.
2
Place originals on the document processor.
IMPORTANT: When placing originals of different width,
arrange the originals so that their left sides and top
sides are aligned, and place the originals in alignment
with the far width guide. If the originals are not aligned
in this way, they may not be scanned correctly, and
skewing or original jams may result.
3
Press [Org./Paper/Finishing] and then [Mixed Size
Originals].
4
Select [Mixed Size Copies] or [Same Size Copies]
as finish size.
5
Select the combination of originals from [Same
Width] and [Different Width].
When [Same Size Copies] is selected, select [Long
Edge Left] or [Short Edge Left] as the first original
orientation.
6
Press [OK].
7
Press the Start key to start copying.
4-8
Copying Functions