Peel roller
Cleaning the Platen
Roller
Platen roller
Use another clean alcohol pad to wipe the peel roller.
4.
Allow the alcohol to dry completely (about five minutes) before you
5.
resume printing.
Close the top cover.
6.
Make sure the power switch is turned off ( ).
1.
Open the top cover.
2.
CAUTION
:
The thermal head becomes extremely hot during normal
operation. Do not touch it.
Remove an alcohol pad from its packaging. Wipe the rubber section of
3.
the platen roller with the pad.
Rotate the roller to clean the entire surface.
4.
Allow the alcohol to dry completely (about five minutes) before you
5.
resume printing.
Close the top cover.
6.
Maintaining the Printer
3-3