Cleaning the Platen Roller
Platen roller
1. Make sure the power switch is turned off ( ).
2. Carefully open the top cover.
CAUTION:
The thermal head becomes extremely hot during normal
operation. Do not touch it.
There are sharp cutter blades inside the printer. Follow
instructions carefully to avoid touching any areas that may
be hazardous.
3. Remove an alcohol pad from its packaging. Wipe the rubber
section of the platen roller with the pad.
4. Rotate the roller to clean the entire surface.
5. Allow the alcohol to dry completely (about five minutes)
before you resume printing.
6. Close the top cover.
Maintaining the Printer
3-3