Kodak 7000 User Manual page 16

Setting Up the Printer
1-10
Feed the paper into the rear printer slot until the red LED light turns off
7.
and the green LED light turns on.
Close the paper door.
8.
NOTE: The ribbon must be loaded in the printer before the paper
automatically advances.
The printer advances the paper, then cuts and discharges 6 blank test
prints—about 24 in. (61 cm). This reduces the possibility of
fingerprints or other damage to the prints. It does not decrease the
1000 4 x 6 in. (10 x 15 cm) print capacity of the paper roll.
The operator panel displays the Ready message.
Empty and replace the trim tray.
9.
NOTE: Empty the trim tray each time you change the paper to keep your
prints dust-free and to prevent paper jams.