Cleaning The Platen Roller; Cleaning The Cleaning Rollers - Kodak 6850 User Manual

Cleaning the Platen
Roller
Platen roller
Cleaning the Cleaning
Rollers
Rear cleaning roller
Front cleaning roller
May 4, 2005
Remove an alcohol pad from its packaging. Wipe the rubber section of
1.
the platen roller with the pad.
Rotate the roller to clean the entire surface.
2.
Allow the alcohol to dry completely (about five minutes) before you
3.
resume printing.
It is essential to keep the cleaning rollers clean to prevent dirt from
transferring back onto the prints and to keep the printer operating correctly.
There are two cleaning rollers in the printer. They are not
IMPORTANT:
interchangeable. Clean them separately to prevent
reinstalling them in the wrong position.
Remove the rear cleaning roller by pulling up on the black knob.
1.
Remove an alcohol pad from its packaging. Wipe the rubber section of
2.
the roller with the pad.
Reinstall the rear cleaning roller in the printer. Push the black knob until
3.
the roller clicks into place.
CAUTION
:
There are sharp cutter blades inside the front roller area. Do
not insert hands or objects.
Repeat steps 1 - 3 to remove, clean, and reinstall the front cleaning
4.
roller.
Maintaining the Printer
5-3